How To Install Drivers In Windows 7 From Usb

The Windows 7 RTM distribution doesn't back up USB 3.0 out-of-the-box, and you can come across some problems with the installation of Windows 7 on a computer/laptop having USB 3.0 ports but (most modern devices released after 2015 have only USB3 ports). For case, USB keyboard and mouse may not work in Windows 7 Setup wizard, or the installer may require to load drivers for your CD/DVD drive:

A required CD/DVD bulldoze device driver is missing. If you take a commuter'southward floppy disk, CD, DVD, or USB flash bulldoze, please insert it now.
Note: If the Windows installation media is in the CD/DVD drive, you lot tin safely remove it for this step.

A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.

Accordingly, you cannot install Windows 7 (or Windows Server 2008 R2) from a USB drive to a computer on which all peripheral devices are connected via USB iii.0 ports.

The Enhanced Host Controller Interface is not supported in the Intel chipsets starting from 100 and 200 series (B150, H110, H170, Q150, Q170, Z170, Intel Apollo Lake), similar AMD chipsets and chipsets from other vendors. Therefore USB 3.0 ports are merely not detected by the Windows vii installer.

To install Windows 7 correctly on some computer models, you can disable USB iii.0 mode in BIOS settings by switching to USB 2.0 compatibility mode (Legacy USB 2.0). In all other cases, y'all will have to modify Windows vii install distro and integrate USB iii.0 drivers for your motherboard chipset to the boot and install WIM images.

Some motherboard vendors released special tools to integrate their USB drivers into your Windows 7 installation image. For example, ASRock (Win seven USB Patcher), MSI (MSI Smart Tool), Intel (Windows USB Installation Tool for Windows 7), Gigabyte (Windows USB Installation Tool) and etc. Only in this article nosotros will show y'all how to manually integrate USB drivers into the Windows seven Install image without using 3rd-party utilities.

All the operations of modifying of the Windows 7 ISO image, described beneath, are performed on a computer running Windows x.

First of all, find USB 3.0 drivers for your chipset and download them from the vendor website (in our example, information technology is Intel® USB three.0 eXtensible Host Controller Driver for Intel® 7 Series/C216 Chipset Family unit). Create a new directory c:\tmp, and create ii subfolders inside information technology: mountain and USB3. Unpack the archive with drivers to the USB3 folder. Inside the USB3 catalog you can create several subfolders with unlike USB 3.0 drivers for pop chipset models.

Next, you demand to update the Windows 7 install image (it may be an ISO file or a ready image copied to the installation USB stick). Yous'll need two WIM files to exist copied to the c:\tmp directory from the Windows vii ISO epitome or the installation deejay:

sources\boot.wim – WinPE kick image used to install Windows on your device;
sources\install.wim – Windows 7 image that will be installed on your reckoner.

Windows 7 boot.wim and install.wim

Run a command prompt with the administrator privileges, and utilise the DISM tool to mount WinPE boot image (boot.wim) and integrate the USB 3.0 drivers into it:

dism /mountain-wim /wimfile:c:\tmp\boot.wim /alphabetize:ii /mountdir:c:\tmp\mountain dism /image:c:\tmp\mount /add-driver:"c:\tmp\usb3" /recurse

$dism /image:c:\tmp\mount /add-driver usb$

The post-obit message indicates that the specified USB3 driver was successfully added to the boot.wim image of the Windows 7 installation environment:

Installing 1 of half dozen — c:\tmp\usb3\Drivers\HCSwitch\x64\iusb3hcs.inf: The driver package was successfully installed.

Save the changes in the image and unmount the kick.wim file (to avoid DISM errors, make sure that you closed all File Explorer windows and the file managers, which has the c:\tmp\mount directory open):

dism /unmount-wim /mountdir:c:\tmp\mount /commit dism /cleanup-wim

Similarly, you need to update the operating system installation paradigm in the install.wim file. Here the chief deviation is that the install.wim prototype can contain several Windows 7 editions with different indexes. So, y'all will have to add drivers to that Windows edition you are going to install (or to all available Windows vii editions in plow).

You tin listing the available Windows 7 editions in the install.wim image as follows:

dism /Get-WimInfo /WimFile:c:\tmp\install.wim

dism Get-WimInfo

In our instance, in that location are four different Windows editions in the install.wim image. We'll add the USB 3.0 driver to Windows 7 Professional with the index iii (this number will be used to address the edition using DISM).

Then add together the USB 3.0 drivers to the Windows paradigm similar we did it above:

dism /mount-wim /wimfile:c:\tmp\install.wim /index:iii /mountdir:c:\tmp\mountain dism /paradigm:c:\tmp\mount /add together-driver:"c:\tmp\usb3" /recurse dism /unmount-wim /mountdir:c:\tmp\mount /commit dism /cleanup-wim

It remains to replace the updated install.wim and boot.wim files on the installation USB wink bulldoze or update the ISO file, and you can utilise this paradigm to install Windows vii on computers with a USB 3.0 controller.

Source: http://woshub.com/adding-usb-3-0-controller-drivers-to-windows-7-install-media/

Posted by: chapmanorry2001.blogspot.com